|
Ad-192 argon dispenser |
|
> The Ad-192 provides additional sample protection from the detrimental actions of humidity and oxygen by applying a blanket of argon to the top of racked storage tubes prior to capping or sealing.
> Two needle assemblies, each consisting of 96 individual stainless steel needles, evenly distribute argon gas into the top of the tube racks.
> For user protection, excess argon is captured by a vacuum source connected to rge bottom of the dispenser.
> Suitable for use with 1.4ml and 0.5ml storage tubes.
> Tubes are easily raised and locked at the desired height using a manual elevator.
> The amount of time for argon dispensing is preset by the user. The argon is applied automatically once the tubes are raised and locked in place.
> The vacuum is activated automatically before the argon is dispensed and continues for a pre-programmed amount of time after the argon has been discontinued.
|
|
VIEW Ad-192 brochure (pdf) |
|
|
|
|
|
|
|
FluidX reserve the right to update and change product information without notice. |
|
|
|
|
|
|
|
Specifications: |
|
|
Power supply |
110/220 AC, 50/60 Hz |
|
Dimensions |
Width 280mm, depth 406mm, height 406mm. |
|
Weight |
13.9 Kg |
|
Inlet gas connection |
6.35mm |
|
Inlet gas pressure |
15psi (min) 65psi (max) |
|
|
|
|
Please contact FluidX for ordering information. |
|
